Path: utzoo!attcan!utgpu!jarvis.csri.toronto.edu!mailrus!hellgate.utah.edu!cs.utexas.edu!tut.cis.ohio-state.edu!ucbvax!agate!eos!amelia!prandtl.nas.nasa.gov!currier
From: currier@prandtl.nas.nasa.gov (Jeffrey M. Currier)
Newsgroups: comp.sys.mac
Subject: MACPS for a VAX
Message-ID: <4162@amelia.nas.nasa.gov>
Date: 11 Dec 89 19:34:18 GMT
Sender: news@amelia.nas.nasa.gov
Reply-To: currier@prandtl.nas.nasa.gov (Jeffrey M. Currier)
Distribution: usa
Organization: NASA Ames Research Center
Lines: 14

I use a program called macps in order to print on a laser connected
to a Sun from my mac.Is there a similar program for print Mac 
PostScript on a LaserWriter connected to a Vax 11/780.  If so
where can I get it.
Thanks in advance.
-jeff

--------------------------------------------
Jeff Currier  (602)621-4948                | 
Computational Fluid Mechanics Lab          |
University of Arizona, Tucson              | 
currier@prandtl.nas.nasa.gov               |
alternate: jeffc@neptune.ame.arizona.edu   |
--------------------------------------------