Path: utzoo!utgpu!jarvis.csri.toronto.edu!cs.utexas.edu!usc!ucsd!ames!amdcad!user7
From: user7@amdcad.AMD.COM (Unix class)
Newsgroups: comp.sys.mac.hardware
Subject: Power/video conn on the SE
Message-ID: <28272@amdcad.AMD.COM>
Date: 5 Dec 89 19:36:03 GMT
References: <7224@dime.cs.umass.edu> <3516@jhunix.HCF.JHU.EDU>
Reply-To: user7@amdcad.UUCP (Unix class)
Organization: Advanced Micro Devices
Lines: 11


Why is it that the Mac Hardware manual shows a 10-pin connector
for the SE power connector (no video) when on my SE logic board
there is a 14 pin connector for both power and video?  If this
is an error(and not due to my logic board being a freak version:-))
, then it is not the only error I found on the Manual.  Seems
like they should have been more careful with the electrical specs
they give on it.
	BTW, are the video signals on the connector TTL levels? I
want to connect a TTL monochrome monitor to it.
		-- CHUNG