Path: utzoo!attcan!utgpu!jarvis.csri.toronto.edu!mailrus!uunet!samsung!shadooby!terminator!shogun!mike From: mike@shogun.us.cc.umich.edu (Michael Nowak) Newsgroups: comp.unix.aux Subject: Re: partitioning for aux Message-ID: <1989Dec12.195047.8934@terminator.cc.umich.edu> Date: 12 Dec 89 19:50:47 GMT References: <1989Dec9.004305.3457@xenlink.uucp> <1989Dec12.041546.14151@Neon.Stanford.EDU> Sender: news@terminator.cc.umich.edu Reply-To: mike@shogun.UUCP (Michael Nowak) Organization: University of Michigan, Ann Arbor Lines: 26 In article <1989Dec12.041546.14151@Neon.Stanford.EDU> kaufman@Neon.Stanford.EDU (Marc T. Kaufman) writes: >In article <1989Dec9.004305.3457@xenlink.uucp> terry@xenlink.uucp (Terry Cioni) writes: >.I purchased AU/X 1.1.1 on disk to install on an SE/30 which is equiped with >.an 80meg Microtech drive - I believe the model type is a Nova 80. > >.Is there partitioning software out there - that can handle this problem. Now >.that I understand that the Hard drive must be AU/X compatible - has someone >.created a work around or are there AU/X compatible third party drives out there. > >Try the MicroNet manager (4.0g) or the MacInStore Installer (2.0.1). Both of >these programs can set up A/UX on generic disks. Or get the latest installer >from the drive vendor. > >Marc Kaufman (kaufman@Neon.stanford.edu) I have a MicroTech Nova 100 and I got Silverlining from LaCie. My A/UX package hasn't arrived so I haven't tested this but I did partition my drive successfully for A/UX. Now I have Cirrus drive icon instead of a Nova icon too. I called Microtech and they don't currently have software to partition their drive for A/UX. I'll let you know how everything worked out with Silverlining after I install my A/UX package. Michael Nowak University of Michigan Computing Center USMail: 611 Church St., 2nd floor Ann Arbor, MI 48104 EMail: mike@us.cc.umich.edu -or- mike_nowak@um.cc.umich.edu