Xref: utzoo sci.electronics:8957 comp.sys.mac.hardware:751
Path: utzoo!attcan!utgpu!jarvis.csri.toronto.edu!cs.utexas.edu!helios!jak9213
From: jak9213@helios.TAMU.EDU (John Kane)
Newsgroups: sci.electronics,comp.sys.mac.hardware
Subject: Powersupply from California DC
Message-ID: <3978@helios.TAMU.EDU>
Date: 8 Dec 89 19:57:50 GMT
Followup-To: poster
Organization: Texas A&M University
Lines: 37

I have a power supply in my SuperMac DataStream tape drive that has
given up the ghost. Something smoked, and with no more smoke left in the
circuitry, it won't work anymore.

I have contacted all of the SuperMac dealers within 180 miles of me, no
luck, no one wants to repair it.

I have contacted SuperMac, they will repair it, on an exchange, for
about $460!!!!

I have tried to reach California DC. The three phone numbers that I
found were all disconnected!

I would just like a replacement supply. Everything else with the drive
is just fine. I am running it on an old PC 65 watt supply now, but this
solution is ugly and a bit too large for the desk.

Specifics:
   Man:        California DC
   P/N:        LR3501-01E
   Input:      115/230 VAC
               47-63 Hz
               2A/1A
   Output:      +5 V @ 2.5 A
               +12 V @ 3.0 A / 6.0 A Peak
   Dimensions: 5 1/2 inches wide
               3 1/4 inches deep
               1 7/8 inches tall

Does anyone have any ideas what more I can try?

Thanks.

 John Arthur Kane, Systems Analyst, Microcomputer Support and Training
 Texas A&M University, College Station, TX 77843  (409) 845-9999

 jak9213@helios.tamu.edu     profs: x043jk@tamvm1.tamu.edu