Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!umich!samsung!brutus.cs.uiuc.edu!psuvax1!psuvm!UNTVAX!IF94
From: IF94@UNTVAX.BITNET
Newsgroups: bit.listserv.novell
Subject: WD8003E; what are the jumper settings?
Message-ID: <NOVELL%90011523000492@SUVM.BITNET>
Date: 16 Jan 90 02:56:00 GMT
Sender: Novell LAN Interest Group <NOVELL@SUVM>
Reply-To: Novell LAN Interest Group <NOVELL@SUVM>
Lines: 28
Approved: NETNEWS@PSUVM Gateway
X-VMS-To: IN%"novell@suvm.bitnet"
Comments:     Warning -- RSCS tag indicates an origin of IF94@NTSUVAXB

Path: ntvaxb!if94
From: if94@vaxb.acs.unt.edu
Newsgroups: novell
Subject: WD8003E; what are the jumper settings?
Message-ID: <17937.25b246ab@vaxb.acs.unt.edu>
Date: 15 Jan 90 21:54:51 GMT
Lines: 21


My boss bought some used WD8003E ethernet cards.  Sure they're cheap,
but we didn't get a scrap of documentation with them.

My problem lies in setting jumper switches.  If you use these wonderful
things, I could use the info on the jumpers.


I'm running:

AST 386 fileserver;
100% IBM compatible workstations;
Netware 2.15 with a NE2000 network interface card in the server.


                        Thanks in advance,
                        (*****--->Timothy.

P.E-M. - I heard some nasty rumors about these cards frazzeling. Comments
         appreciated.