Path: utzoo!utgpu!ugw.utcs.utoronto.ca!CUVMA!SWL-L Date: Sat, 13 Jan 90 22:31:51 EST Reply-To: Preacher Sender: Short Wave Listener's List Comments: Warning -- original Sender: tag was From: Preacher Subject: Re: voice-activated tape recorders X-To: swl-l@cuvmb.cc.columbia.edu To: UofToronto LAN redistribution Message-ID: <90Jan13.230649est.57744@ugw.utcs.utoronto.ca> Newsgroups: bitnet.swl-l Distribution: ut Approved: devnull@gpu.utcs.toronto.edu garylee@shasta.scl.cwru.edu (Gary Lee) writes: |In article <23114@ut-emx.UUCP> padraig@emx.UUCP (Padraig John Houlahan) writes: |>I bought one but returned it within a few hours. The vox capability didn't |>work when the power supply was used, and I sure don't want to be burried in |>batteries. [I believe it was, as another poster claimed, the AC hum that |>triggered the vox continuously.] |> |>Padraig Houlahan. | |What adapter did you use! I use the one my Salesman suggested (after checking |And yes, the VOX does work with the adapter in use. The radio shack store around here at this time does not have the adapter needed for this recorder. But I have found that by using 4.5v instead of 6v the VOX works just fine. Has anyone else tried this? Another thing is the VOX works well with my Sony 2002 shortwave, Bearcat bc 140 scanner, and of course the pro 34 scanner... -- Some people too big, | mailrus!sharkey!lopez!preacher Some poeple too small, |-------------------------------------- Some people just right but they talk too much. -- My Grandfather