Xref: utzoo comp.unix.i386:2312 comp.unix.xenix:9461 comp.sys.ibm.pc:42012 comp.dcom.modems:5062
Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!iuvax!ndcheg!ndmath!nstar!larry
From: larry@nstar.UUCP (Larry Snyder)
Newsgroups: comp.unix.i386,comp.unix.xenix,comp.sys.ibm.pc,comp.dcom.modems
Subject: Computone drivers under 386/ix
Keywords: Computone 386ix
Message-ID: <511140@nstar.UUCP>
Date: 14 Jan 90 15:24:27 GMT
Organization: Northern Star Communications, Notre Dame, IN, USA
Lines: 18

In a couple of messages I posted over the previous week I had mentioned
that the 4.40 Computone drivers were working fine with bi-directional
communications using high speed modems under 386/ix.

This information proved to be in-correct as I was having problem with
incoming callers using the Telebit lines when the modems were also being
used for outbound calls.  

I am now back to using the drivers on the Computone Disk marked "Driver
4.31 for AT&T or Interactive 386 Unix System V Release 3.2" which works
fine with bi-directional communications (re-verified).  

Sorry for any problems created - 


-- 
          Larry Snyder, Northern Star Communications, Notre Dame, IN USA 
                uucp: larry@nstar -or- ...!iuvax!ndmath!nstar!larry