Xref: utzoo comp.graphics:9369 comp.sys.ibm.pc:42108 comp.sys.mac:46351
Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!uwm.edu!zaphod.mps.ohio-state.edu!sol.ctr.columbia.edu!larry!gaudi!csuf3b!thomasp
From: thomasp@csuf3b.CSUFresno.EDU (Thomas Pearson)
Newsgroups: comp.graphics,comp.sys.ibm.pc,comp.sys.mac
Subject: SuperPaint ===> CAD
Message-ID: <1990Jan16.101452.12414@csuf3b.CSUFresno.EDU>
Date: 16 Jan 90 10:14:52 GMT
Reply-To: thomasp@csuf3b.UUCP (Thomas Pearson)
Distribution: usa
Organization: C.Sci Dept., CA. State Univ, Fresno
Lines: 22

I'm looking for a program to convert from Macintoch's SuperPaint(v. 2.0)
file format to an IBM-type CAD format.  The SuperPaint file(document) was
made in the "Draw Layer".  The CAD format can be either IGES, DXF, or HPGL.
The conversion program has to run on IBM-type machines.  Also the drawings
I will be converting are just line-art, black lines on white background.

I'll read that some hand-held scanners have optional application programs
that convert to CAD formats.  Do these programs work???

I'm looking for a price of under $300.

         Thank's for taking the time to read this posting.

/****************************************************************************\
* Thomas Pearson                     |Internet:                              *
* California State University, Fresno|thomasp@csufres.CSUFresno.EDU          *
\****************************************************************************/
-- 
/****************************************************************************\
* Thomas Pearson                     |Internet:                              *
* California State University, Fresno|thomasp@csufres.CSUFresno.EDU          *
\****************************************************************************/