Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!tut.cis.ohio-state.edu!cs.utexas.edu!samsung!brutus.cs.uiuc.edu!wuarchive!udel!mmdf From: C475141@umcvmb.missouri.edu (Brian Whitman) Newsgroups: comp.sys.amiga Subject: Re: Disk went Bad! Message-ID: <8258@nigel.udel.EDU> Date: 15 Jan 90 17:13:47 GMT Sender: mmdf@udel.EDU Lines: 33 When is DiskSalv not the answer? It seems to me always. I have never been able to get the blasted thing to work. I have sent in comments to C.S.A and noone seems to deem it necessary to enlighten me on what I am doing wrong. In fact I had another person say that they were having the exact same problems. They were using a 2000 I believe (it has been a couple months now). If you would help me out I would gladly recant my above statement. Here is the setup A1000 w/ 512k one external 3.5 drive, a modem, and a printer. (Modem and printer shouldn't make any difference but anyways.) My attempt (and please forgive me for I don't have the docs here in front of me and it has been about 2 to 3 months since I have tried to do any- thing with it) was to do DISKSALV DF1: It loads DISKSLAV and then ask to insert the diskette into DF1:. I do and press return. It starts crunching away. I don't remember what it says something about reading diskete and then it ran out of storage. So I looked back through the docs for how do only a segment thinking that I could split it up into about 4 or 5 segments. I started with like track 0 to 19 I think. still the same problem. I wound down to doing only bocks of 3 tracks I think and still the same problem - "Out of memory" That is when I decided that DiskSalv was a piece of trash. If you can change my mind I would appreciate it. I will probably go home and try it again and write you the real results later on tonight. But please help me get this thing to working. __ ___ / > / / // /--< ._ ' _ ._ /-- / //__ ' -/- .___ _ .__ /___/ / / <__/ / /___ o /_/_// /_/_/__/ / /_<__/ / C475141@UMCVMB.Bitnet C475141@Missouri.edu