Path: utzoo!utgpu!jarvis.csri.toronto.edu!cs.utexas.edu!yale!mintaka!bloom-beacon!bu.edu!bu-cs!mirror!ssi3b1!pselver
From: pselver@ssi3b1.zone1.com (Peter Selverstone)
Newsgroups: comp.sys.amiga
Subject: Re: Cables for NEC IIa multisync to A2000
Keywords: A2000, NEC IIa, cable
Message-ID: <1990Jan15.052443.23284@ssi3b1.zone1.com>
Date: 15 Jan 90 05:24:43 GMT
References: <935@fs1.ee.ubc.ca>
Reply-To: pselver@ssi3b1.UUCP (Peter Selverstone)
Organization: Spy Pond Systems
Lines: 19

In article <935@fs1.ee.ubc.ca> daves@fs1.ee.ubc.ca (Dave Small) writes:
>
>I've just ordered a NEC multisync IIa for my A2000.  Does it come with
>the proper cables, or should I start looking around now for a set?

The NEC MultiSync 2A is, curiously enough, not a multiscanning monitor.
It is a VGA (and Super-VGA) monitor.  It will work fine if you have a
flicker fixer board, but it cannot be connected directly to the Amiga.
If you are not ready to get a flicker fixer, then I'd suggest you change
your order to a NEC 3D which can be used either way.  No special cables
are needed to connect a NEC 3D to a flicker fixer, but for any other
combination you will need a cable.  The usual source is Redmond Cable
(206) 882-2009.

-- 
Peter Selverstone ...{mit-eddie,pyramid,datacube}!mirror!ssi3b1!pselver
Spy Pond Systems  pselver@ssi3b1.zone1.com
Arlington, MA     BIX:pselverstone   PLINK:pselverst   CIS:72527,2652