Path: utzoo!utgpu!jarvis.csri.toronto.edu!cs.utexas.edu!uwm.edu!rpi!zaphod.mps.ohio-state.edu!uakari.primate.wisc.edu!aplcen!uunet!mcsun!sunic!tut!santra!pollux.hut.fi!ayr
From: ayr@pollux.hut.fi (Ari Yrj|l{)
Newsgroups: comp.sys.amiga
Subject: Re: Cables for NEC IIa multisync to A2000
Keywords: A2000, NEC IIa, cable
Message-ID: <1990Jan17.172823.13660@santra.uucp>
Date: 17 Jan 90 17:28:23 GMT
References: <935@fs1.ee.ubc.ca> <1990Jan15.052443.23284@ssi3b1.zone1.com>
Sender: news@santra.uucp (Cnews - USENET news system)
Reply-To: ayr@pollux.hut.fi (Ari Yrj|l{)
Organization: Helsinki University of Technology, Finland
Lines: 19

In article <1990Jan15.052443.23284@ssi3b1.zone1.com> pselver@ssi3b1.UUCP (Peter Selverstone) writes:

>The NEC MultiSync 2A is, curiously enough, not a multiscanning monitor.
>It is a VGA (and Super-VGA) monitor.  It will work fine if you have a
>flicker fixer board, but it cannot be connected directly to the Amiga.


That sounds strange. I had no problems connecting NEC Multisync IIA to
my Amiga. I just made a cable with RGB, sync and ground signals connected
and everything worked fine.

If you know what you're talking about then I guess NEC is selling
different monitor under same name here in Europe...


-->    // This msg is sent by:  Ari  Yrjola  + Internet: ayrjola@kampi.hut.fi
-->:: // Address: JMT 3B 231b                + BITNET:   lk-ay@finhut.bitnet
--> :X/          02150 ESPOO ,Finland,Europe + VoiceNet: +358-0-468 3088
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~