Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!uwm.edu!cs.utexas.edu!usc!elroy.jpl.nasa.gov!gryphon!pnet02!lampi
From: lampi@pnet02.gryphon.com (Michael Lampi)
Newsgroups: comp.sys.apollo
Subject: Re: DN3500 refuse to get into DM
Message-ID: <24793@gryphon.COM>
Date: 15 Jan 90 23:00:14 GMT
Sender: root@gryphon.COM
Organization: People-Net [pnet02], Redondo Beach, CA.
Lines: 11

Sounds to me like you might have the "service mode" switch set to "service".
It's a small toggle switch adjacent to the reset button. If it's in the down
position, then it is in service mode.

BTW, you can start the DM at the Phase II Shell by entering the "GO" command.

Michael Lampi               MDL Corporation   213/782-7888   fax 213/782-7927

UUCP: {ames!elroy, <routing site>}!gryphon!pnet02!lampi
INET: lampi@pnet02.gryphon.com
"My opinions are that of my corporation!"