Path: utzoo!utgpu!jarvis.csri.toronto.edu!clyde.concordia.ca!uunet!mcsun!cernvax!achille
From: achille@cernvax.UUCP (achille petrilli)
Newsgroups: comp.sys.apollo
Subject: Re: Need Jumpersettings for WD 7000 Controller
Keywords: Jumper WD 7000
Message-ID: <1202@cernvax.UUCP>
Date: 16 Jan 90 09:18:06 GMT
References: <1589@uniol.UUCP>
Reply-To: achille@cernvax.UUCP (achille petrilli)
Distribution: comp
Organization: CERN European Laboratory for Particle Physics, CH-1211 Geneva, Switzerland
Lines: 20

In article <1589@uniol.UUCP> lehners@uniol.UUCP (Joerg Lehners) writes:
>Hello !
>
>I'm looking for the right jumpersettings of a WD 7000 ESDI/Floppy/SCSI
>Controller for a Apollo Domain DN 3500.
>
>  Joerg

Hi, 
if you're running sr10.2 the solution is an easy one:
just type /systest/ssr_util/jumper. A graphical screen will come out
and then you can poke around for disk controllers.
There you'll find all disk controllers Apollo has been shipping with a
couple of settings shown.
Not totally clear, but gives you the feeling of what should be changed.

Good luck,

	Achille Petrilli
	Cray & PWS operations