Xref: utzoo comp.os.os2:553 comp.sys.ibm.pc:42167
Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!umich!samsung!uunet!mitel!sce!ajai
From: ajai@sce.carleton.ca (Ajai Sehgal)
Newsgroups: comp.os.os2,comp.sys.ibm.pc
Subject: Problems With Mouse after Booting OS/2 from DOS
Keywords: DOS,OS/2,MOUSE
Message-ID: <759@sce.carleton.ca>
Date: 15 Jan 90 20:55:07 GMT
Organization: Systems & Computer Eng. Dept., Carleton University, Ottawa, Canada
Lines: 10

I'm running OS/2 V1.2 (dual boot) with DOS v4.01 on a 10MHz 80286 based system
(ATI VGA Wonder, 80287 , 40Meg Hard Drive, COMM 1 = Logitech HiRez Serial Mouse,COMM 2 = 2400 Baud external Modem COMM 3 = 1200 Baud Internal Modem, 4Mb 80ns 
DRAM).
When I boot 0S/2 from DOS using Boot.com my mouse will not respond (at all othertimes it works fine). The only way to fix the problem is a COMPLETE POWER DOWN
AND POWER UP (Ctrl-Alt-Del and Reset [H/W reset] don't work). Has anyone else
experienced this problem? Any suggested solutions? There are no IRQ or Port 
Address conflicts. My "clone" is based on a Suntac Baby AT motherboard and has
never given me problems before (and doesn't under other circumstances).

Ajai