Path: utzoo!attcan!uunet!philmtl!zap!zoom!gosselin
From: gosselin@CLIK.QC.CA (Pascal Gosselin)
Newsgroups: comp.sys.mac.hardware
Subject: Re: SCSI PROBLEMS
Message-ID: <1675@zoom.CLIK.QC.CA>
Date: 12 Jan 90 18:32:52 GMT
References: <7794@sybase.sybase.com> <808@tuewsd.lso.win.tue.nl> <25762@cup.portal.com>
Reply-To: gosselin@CLIK.QC.CA (Pascal Gosselin)
Organization: CLIK Telematique Inc., Montreal QC
Lines: 21


My friend, you have fallen pray to the infamous BUILT-IN SCSI TERMINATOR on
RODIME hard disks.

To get your setup working, put the RODIME at the end of your SCSI chain, with 
no other terminators present.  If problems persist, ADD a terminator BEFORE
entering the FIRST device.   This is actually what Apple officially recommends!

The other solution is to open up the Rodime 140 and remove the terminator
that is inside the drive's housing (on the SCSI controller board, near the
SCSI connection on the Hard disk....


Good luck...


-- 
-----------------------------------------------------------------------------
Pascal Gosselin 				|    gosselin@clik.qc.ca    |
SIMCO, Inc. - A division of Computer Connection	| uunet!clik.qc.ca!gosselin | 
-----------------------------------------------------------------------------