Path: utzoo!attcan!uunet!mcsun!sunic!tut!santra!tuura!pena
From: pena@tuura.UUCP (Pentti Soini)
Newsgroups: comp.unix.xenix
Subject: Re: Computone board for dial in/out modem - anybody make it work
Message-ID: <584@tuura.UUCP>
Date: 13 Jan 90 09:29:35 GMT
References: <278@boake2.UUCP>
Organization: Nokia Data Systems Oy
Lines: 17

scott@boake2.UUCP (Scott Boake) writes:

>Has anybody been able to make a Computone board work for dial in/out under
>...
>Has anybody be able to make ANY intelligent I/O card work both ways ?

We are using intelligent Specialix SI-cards under SCO Xenix 2.3.2. We
have 6 modems connected to our 386 system through this card and all
modems work for dial in/out without any problems. Most of our modems are
9600 baud error correction (MNP5/LAPB) Hayes compatible modems. In fact
we have also used SLIP (SCO TCP/IP) over those SI/modem lines with very
good results (0.6 - 0.8 kb/sec!).

-- 
Pentti Soini					pena@yj.data.nokia.fi
Nokia Data, General Systems, Finland		+358-0-5673987
Tech. Support / Unix based systems		PO.Box 780, SF-00101 Helsinki