Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!uunet!mstan!amull
From: amull@Morgan.COM (Andrew P. Mullhaupt)
Newsgroups: comp.unix.xenix
Subject: Re: UDS V.32 not yet dialing out for me...
Summary: So far so good, but...
Message-ID: <678@s5.Morgan.COM>
Date: 14 Jan 90 20:26:51 GMT
References: <674@s5.Morgan.COM> <511141@nstar.UUCP>
Organization: Morgan Stanley & Co. NY, NY
Lines: 18

In article <511141@nstar.UUCP>, larry@nstar.UUCP (Larry Snyder) writes:
> In article <674@s5.Morgan.COM>, amull@Morgan.COM (Andrew P. Mullhaupt) writes:
> > Anyone know how to make a UDS V.32 (9600 Baud) modem work with
> 
> What I do for new modems, is simply read the configuration options
> from the manual and first get the modem to answer the phone, then
> enter the dialing string in /usr/lib/uucp/Dialers to dial outbound
> calls and connect.


So far so good, but (forgive me if this sounds obtuse), but as 
far as I can tell there isn't an appropriate entry for this modem
in my /usr/lib/uucp/Dialers. Will one of the other ones work? I
tried a couple with no success. Also: I only need to call out,
not to call in.

Later,
Andrew Mullhaupt