Path: utzoo!utgpu!jarvis.csri.toronto.edu!cs.utexas.edu!wuarchive!texbell!vector!holston!barton
From: barton@holston.UUCP (Barton A. Fisk)
Newsgroups: comp.unix.xenix
Subject: Re: Using speeds above 9600 on a dumb serial port
Summary: I run terminals at 19.2 off an Arnet dumb serial board
Keywords: 9600 serial port
Message-ID: <5665@holston.UUCP>
Date: 17 Jan 90 19:38:10 GMT
References: <2238@ucqais.uc.edu>
Organization: Barton A. Fisk & Co.
Lines: 14

In article <2238@ucqais.uc.edu>, pmartin@ucqais.uc.edu (Paul Martin) writes:
> 
> Is there an easy way to use 19.2k or 38.4k on a dumb serial card?

I am running terminals at 19.2 off an Arnet dumb board with no 
additional software. The OS is SCO 2.2.1. Use the exta and extb(38.4)
entries in the gettydefs file (providing of course that your serial
chip can go that fast).
   
-- 
Barton A. Fisk          | UUCP: {attctc,texbell}vector!holston!barton
PO Box 1781             | (PSEUDO) DOMAIN: barton@holston.UUCP     
Lake Charles, La. 70602 | ----------------------------------------
318-439-5984            | "Let him who is without sin cast the first stone"-JC