Path: utzoo!utgpu!watserv1!watmath!uunet!shelby!apple!usc!cs.utexas.edu!uhnix1!moray!judy
From: judy@moray.UUCP (Judy Scheltema)
Newsgroups: unix-pc.general
Subject: Re: Help! - Installing ST4096 on 3B1...
Keywords: ST4096, Drive Parameters
Message-ID: <28366@moray.UUCP>
Date: 15 Jan 90 12:25:07 GMT
References: <1846@cbnewsk.ATT.COM>
Reply-To: judy@moray.UUCP (Judy Scheltema)
Distribution: na
Organization: Houston, Texas
Lines: 57

In article <1846@cbnewsk.ATT.COM> ntj@cbnewsk.ATT.COM (najmi.jarwala) writes:
>Could some one please mail me the following parameters for the 
>ST4096:

Below is my /usr/lib/iv/seagate4096 file:


type		HD2
name		WINCHE
cylinders	1024
heads		9
sectors		17
steprate	0
$
badblocktable	1
loader		/usr/lib/iv/s4load.silent
$
4783
5484
5637
5790
33394
33241
43976
52391
4630
4936
33547
43194
41369
105176
51642
23061
761
70517
$
0
9
369
819
4356
$
$


>Number of tracks per cylinder: (This I presume is same as number of
>heads. 8 before P5.1 upgrade, 9 after P5.1 upgrade. Right???)

Yup..

>Number of sectors per track: ?????

See above - 1024
-- 
Judy Scheltema                |                     uunet!nuchat!moray!judy
P. O. Box 270249	      |                            shell!moray!judy
Houston, Texas 77277-0249     |                 bellcore!texbell!moray!judy