Path: utzoo!utgpu!jarvis.csri.toronto.edu!clyde.concordia.ca!uunet!mcsun!sunic!luth!d87-khd
From: d87-khd@sm.luth.se (Karl-Gunnar Hultland)
Newsgroups: comp.sys.amiga.tech
Subject: Re: Question about multiple serial boards
Message-ID: <709@tau.sm.luth.se>
Date: 19 Jan 90 01:46:53 GMT
References: <1013@lpami.wimsey.bc.ca> <1053@madnix.UUCP>
Reply-To: Karl-Gunnar Hultland <d87-khd@tau.luth.se>
Organization: University of Lulea, Sweden
Lines: 27
UUCP-Path: {uunet,mcvax}!sunic.se!tau.luth.se!d87-khd

In article <1053@madnix.UUCP> perry@madnix.UUCP (Perry Kivolowitz) writes:
>
>Due to its enormous usefulness to those who need it, we (ASDG) 
>provide both a ser: and aux: clone with the Dual Serial Board. These
>handlers both support complete command line serial parameter specification,
>like so (using Darren's example):
>
>	Open("Joey:9600" , MODE_OLDFILE)       or just as easily
>	Open("Joey:19200/8N1/32000" , MODE_OLDFILE) etc.
>
>We also support two levels of defaults for filling in the serial parameters
>which were not specified on the command line. 

That seems like the thing I'd need if I manage to port MUD to the Amy.
What's the price of the board , with software?

					Karl

+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
| Karl 'Dixie' Hultland |     email: d87-khd@sm.luth.se                       |
| University of Lulea   |          : {uunet,mcvax}!sunic.se!sm.luth.se!d87-khd|
| Sweden                | Snailmail: Mjolkuddsv. 63-5, S-95157 Lulea Sweden   |
|=======================| Voice nat: 0920-15479                               |
| Urbi et Orbi          | Voice int: +46 920 15479                            |
|=============================================================================|
|       If two people agree on EVERYTHING , one of them is OBSOLETE!!         |
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++