Path: utzoo!utgpu!jarvis.csri.toronto.edu!cs.utexas.edu!uwm.edu!bionet!ames!eos!phil
From: phil@eos.UUCP (Phil Stone)
Newsgroups: comp.sys.amiga.tech
Subject: Re: Problems with 8520
Summary: ADDENDUM/CLARIFICATION TO PREVIOUS POST
Message-ID: <6026@eos.UUCP>
Date: 23 Jan 90 01:12:42 GMT
References: <6025@eos.UUCP>
Reply-To: phil@eos.UUCP (Phil Stone)
Organization: NASA Ames Research Center, Calif.
Lines: 14

Sorry.  I need to clarify what I just posted...

In article <6025@eos.UUCP> phil@eos.UUCP (Phil Stone) writes:
>I've had repeated problems apparently blowing out lines on one
>of my 8520's. [. . .]
>[. . .] the FIRE0 line is always asserted
>(the mouse fire button always thinks its down) and my printouts

This is probably quite confusing.  I forgot to mention that I'm
reading a track ball off of the SECOND joystick port, and *its*
fire button is the one that seems stuck down (the trackball works
fine in the first port, btw, so I know it's not the problem).

		Phil Stone	 (phil@eos.arc.nasa.gov | ames!eos!phil)