Path: utzoo!utgpu!jarvis.csri.toronto.edu!cs.utexas.edu!ut-emx!ibmchs!auschs!d75!awdprime!kdillman.austin.ibm.com!ken
From: ken@kdillman.austin.ibm.com (Ken Dillman)
Newsgroups: comp.sys.ibm.pc.rt
Subject: Re: Remote printer queues using lprbe
Message-ID: <1348@awdprime.UUCP>
Date: 19 Jan 90 01:18:13 GMT
References: <1283@husc6.harvard.edu>
Sender: news@awdprime.UUCP
Reply-To: ken@reed.UUCP (Ken Dillman)
Organization: IBM Advanced Workstation Division
Lines: 20

In article <1283@husc6.harvard.edu> kovar@popvax.harvard.edu (David C. Kovar) writes:
>
>rp0:
>	argname = rp0
>	friend = TRUE
>	device = drp0
>
>drp0:
>	backend = /usr/bin/lprbe
>

Try the following:
	backend = /usr/bin/lprbe -pserver=<nodename> -statusfile

There is also a pqueue= argument if you want to send it to a specific
print queue on the pserver rather than the default one.
-------------------------------------------------------------------------------
Ken Dillman           | 11400 Burnet Road | Phone: T/L 678-4804 or
AIX Technical Support | Austin, TX  78754 |            512/838-4804
ZIP 2830              |                   | VNET/PROFS: KDILLMAN at AUSTIN