Xref: utzoo comp.sys.mac:46742 comp.sys.mac.hardware:1281
Path: utzoo!utgpu!jarvis.csri.toronto.edu!cs.utexas.edu!samsung!usc!apple!fox!portal!cup.portal.com!david_islander_hughes
From: david_islander_hughes@cup.portal.com
Newsgroups: comp.sys.mac,comp.sys.mac.hardware
Subject: Freezing problems with PM 3.x/Superlaserspl 5.x
Message-ID: <26127@cup.portal.com>
Date: 20 Jan 90 01:59:35 GMT
References: <1990Jan10.181218.17218@aucs.uucp> <3632@hub.UUCP>
Organization: The Portal System (TM)
Lines: 31

First the good news: By ADDING a terminator (for total of 3!) in my scsi chain
I was able to get everything working. Rodime is internal, so had to be 0, natc

Thanks to all who suggested checking ID numbers, that was the first thing I di
One responder suggested two capacitors on the scanner could be at fault.

New problem (actually an old one I had just put on back burner:)
Configuration:
Mac2x, 4 mmeg/140 Rodime INT, Masterjuggler, usual intits, backfax, etc.

Superlaserspool 5. will work (VERY occasionally) with PM 3.x. Mostly it just
causes the system to freeze.

Writes files Postscript 01, 02, etc. But 02 usually ends up outside the 
sls spool folder on the desktop.

I have no clues on this one. I have tried renaming it, etc., but nothing
seems to work. It seems to be just what I need in my net cofiguration,
but not if it bombs.

As an aside, does anyone have the fax number for Bay Area Computers in SF?

Also need a demo or evaluation copy of Gofer II and Thunder II. Please e-mail.

GOFER might be what we need in the archives of our old newspaper stories.

I understand you can use a word or phrase like John H. Doe, and it will find
every story with those words in it.

Thanks out there in netland. You have been a world of help. It's tough to
get good info here on Guam.