Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!swrinde!zaphod.mps.ohio-state.edu!brutus.cs.uiuc.edu!ux1.cso.uiuc.edu!ux1.cso.uiuc.edu!uxa.cso.uiuc.edu!bty00298
From: bty00298@uxa.cso.uiuc.edu
Newsgroups: comp.sys.amiga
Subject: Re: HELP! USING AMIGA WITH HP DESKJET?
Message-ID: <46200045@uxa.cso.uiuc.edu>
Date: 16 Mar 90 10:39:23 GMT
References: <1732@kannel.lut.fi>
Lines: 15
Nf-ID: #R:kannel.lut.fi:1732:uxa.cso.uiuc.edu:46200045:000:623
Nf-From: uxa.cso.uiuc.edu!bty00298    Mar 15 14:18:00 1990


	All that is necessary is to select HP Deskjet from preferences.  If
you are using floppys it may be necessary to copy the printer driver from
the Extras diskette into the devs/printers directory on your Workbench.  I am
assuming that you are running Workbench 1.3.  I am not certain if WB 1.2
supported Deskjet, but if so the same applies.

	I would also recommend getting the replacement HP Deskjet driver
which is faster than the one supplied by Commodore.  It is commercially
available, but a PD (slightly crippled) version exists.


Brian Yamanaka
University of Illinois at Urbana-Champaign
bty00298@uxa.cso.uiuc.edu