Path: utzoo!utgpu!news-server.csri.toronto.edu!mailrus!uunet!mcsun!ukc!strath-cs!bsyme
From: bsyme@cs.strath.ac.uk (Brian J Syme IE88)
Newsgroups: comp.sys.amiga.hardware
Subject: Re: Upgrading 500 to 1 Mb
Keywords: 500 Rev 6A 1 Meg on board upgrade
Message-ID: <2705@baird.cs.strath.ac.uk>
Date: 19 Mar 90 21:25:56 GMT
References: <3148@draken.nada.kth.se> <6986@cps3xx.UUCP> <10248@cbmvax.commodore.com>
Reply-To: bsyme@cs.strath.ac.uk
Organization: Comp. Sci. Dept., Strathclyde Univ., Scotland.
Lines: 19

In article <10248@cbmvax.commodore.com> jss@cbmvax (John Schilling - Product Assurance) writes:
>We do not reccomend, suggest, or express that the holes on the board of
                      ^^^^^^^
>a rev. 6.x A500 mother are useable for ram expansion.

I'd say putting them there was a fairly heavy hint. 

>It is our policy that the A500 can be upgraded to a maximum of 1Mb
>internal ONLY through the use of an CBM A501 memory/clock module.

Hmmm...  tell me, it couldn't be that you make _money_ out of this? No?


-- 
<><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><>
<> Brian Syme            <> Why make things difficult, when with just a     <>
<> bsyme@cs.strath.ac.uk <> little more effort you could make them          <>
<>                       <> impossible.                                     <>
<><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><>