Path: utzoo!attcan!uunet!ogicse!uwm.edu!zaphod.mps.ohio-state.edu!samsung!umich!vela!bbesler
From: bbesler@vela.acs.oakland.edu (Brent Besler)
Newsgroups: comp.sys.ibm.pc
Subject: Re: MAC disks on an AT
Message-ID: <398@vela.acs.oakland.edu>
Date: 19 Mar 90 19:00:52 GMT
References: <1990Mar17.131553.25385@stretch.cs.mun.ca>
Reply-To: bbesler@vela.acs.oakland.edu (Brent Besler)
Organization: Oakland University, Rochester MI
Lines: 11

>	I have a 386 clone and want to be able to work with disks for 
>a Macintosh. I would appreciate any help that you have to offer. I need
>to know what kind of hardware and software is necessary, and what the 
>most reliable way is. 

The Central Point Deluxe Option Board will allow a PC clone 3.5" drive to read
and write Mac disks in addition to copying just about any known copy protected
PC disks.  It can't of course allow a PC to run Mac software.  Also you 
need a 1.44 Mbyte 3.5" drive to handle the new higher desnity Mac disks.

                                        Brent H. Besler