Path: utzoo!attcan!uunet!snorkelwacker!usc!ucsd!helios.ee.lbl.gov!pasteur!ucbvax!aero4.larc.nasa.gov!blbates
From: blbates@aero4.larc.nasa.gov ("Brent L. Bates AAD/TAB MS294 x42854")
Newsgroups: comp.sys.sgi
Subject: Re:  Parallel printing from 4D/70G ?
Message-ID: <9003211545.AA03023@aero4.larc.nasa.gov>
Date: 21 Mar 90 12:45:55 GMT
Sender: daemon@ucbvax.BERKELEY.EDU
Organization: The Internet
Lines: 15


   I don't know if this will help, but, we have a 4693D printer and there
is a menu option on the printer to specify that you are using a Centronics
interface instead of a Tektronics interface.  There are also some dip
switches that might need to be adjusted too.  As I said this is for a 4693D,
I don't know if your 4692 has the same adjustments or not.  Hope this is
of some help.
--

	Brent L. Bates
	NASA-Langley Research Center
	M.S. 361
	Hampton, Virginia  23665-5225
	(804) 864-2854
	E-mail: blbates@aero4.larc.nasa.gov or blbates@aero2.larc.nasa.gov