Path: utzoo!utgpu!news-server.csri.toronto.edu!mailrus!uunet!cs.utexas.edu!usc!apple!oliveb!tymix!hobbes!pnelson
From: pnelson@hobbes.uucp (Phil Nelson)
Newsgroups: comp.sys.amiga
Subject: why won't my Cp340 verify???
Summary: need help with Cp340 as 2nd drive on 2091
Keywords: Conner Cp340, 2091, SCSI,
Message-ID: <3395@tymix.UUCP>
Date: 29 Mar 90 02:24:11 GMT
Sender: usenet@tymix.UUCP
Reply-To: pnelson@hobbes.UUCP (Phil Nelson)
Distribution: usa
Organization: BT Tymnet, Inc. / San Jose, CA
Lines: 25


 I recently bought a 2091 with a Quantum 40Meg, these work well (fast too).
When I tried to add a Conner Cp340, I ran into problems. I think the
hardware is set up right, HDToolbox finds it OK as SCSI 1, and read the
configuration from the drive OK, as;

		    Drive Name: Cp340 (40mb 3.5),
		Drive Revision: 0456

		Cylinders: 1205
		    Heads: 1
	 Blocks per Track: 68
      Blocks per Cylinder: 68

When I try to format, a requester comes and goes too quickly to read, when I
try to Verify Data on Drive, a requester comes and goes as above, then a 2nd
requester says "Illegal Request Error (32)". Can anyone tell me what I'm
doing wrong here? Also, will I be able to "Automount" this drive as a single
FFS partition?

Thanks in advance for any help you can give.
Phil Nelson at (but not speaking for)                  OnTyme:NSC.P/Nelson
BT Tymnet                                               Voice:408-922-7508
UUCP:{pyramid|ames}oliveb!tymix!pnelson              LRV:Component Station
Help defend the Second Amendment - Boycott Time Inc.