Path: utzoo!utgpu!news-server.csri.toronto.edu!clyde.concordia.ca!uunet!van-bc!rsoft!mindlink!a309
From: a309@mindlink.UUCP (George Lin)
Newsgroups: comp.sys.amiga.hardware
Subject: Re: 2 Questions about DiamondScan
Message-ID: <1376@mindlink.UUCP>
Date: 26 Mar 90 20:00:43 GMT
Organization: MIND LINK! - British Columbia, Canada
Lines: 22

Howdy Rick...

Regarding you monitor...

I have the same monitor (Thomson Ultrysync = Mits Diamond Scan).
And I do use it to run my Amiga, IBM/EGA, and VCR/video.  There should be 3
switches on the back of your monitor, two on the right, one on the left.  One
of the switches on the right should be marked:

   Video  --  TTL  --  Analog

With that switch, you can run all three types of inputs.
BTW, I have the redmond cable myself, but there is an article in Amazing
Computing on how to make a cable for your/my monitor.  Also, if you are
familiar with TTL transistors, it is also quit trivial to make a cable like the
ones supplied by redmond.

Hope that helps

--------------------------------
George Lin
(the above address or school address ggill@fs0.ee.ubc.ca)