Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!usc!zaphod.mps.ohio-state.edu!rpi!vancleef From: vancleef@pawl.rpi.edu (David A. Van Cleef) Newsgroups: comp.sys.att Subject: Re: Memory Boards for 6386s Message-ID: Date: 27 Mar 90 20:45:36 GMT References: <3702@infmx.UUCP> Distribution: na Organization: Rensselaer Polytechnic Institute, Troy NY Lines: 11 In article <3702@infmx.UUCP> aland@infmx.UUCP (Dr. Scump) writes: Quick Question, for those who know: Will the 4/16 MB Memory board that ships for the 6386E/33s (Comcode 406130534, PE Code 37337) work in the old 16 MHz 6386 WGS? No, no, a thousand times no. The AT32 bus connector in the 6386/33 is an 86 pin connector, as compared to the PCET bus, which has only 40 connectors in the 32 bit extension. The pinouts are documented on page 4-7 of the 6386/33 Hardware Reference Manual.