Path: utzoo!attcan!uunet!cs.utexas.edu!ut-emx!nghiem
From: nghiem@ut-emx.UUCP (Alex Nghiem)
Newsgroups: comp.sys.ibm.pc
Subject: Re: Summary: Questions about INTEL 386/PC Inboard
Keywords: INTEL, INTEL 386/PC Inboard, Accelerator Cards
Message-ID: <26804@ut-emx.UUCP>
Date: 24 Mar 90 03:55:13 GMT
References: <1990Mar23.165957.18040@ncsuvx.ncsu.edu>
Reply-To: nghiem@emx.UUCP (Alex Nghiem)
Organization: UTexas Computation Center, Austin, Texas
Lines: 20

I have two corrections to add:

1. I stated that the Intel 386/PC needs only 16k to boot 
DOS intially on my clone. Actually, it needs Bank 0, which is
64K

2. I stated that you can add three megs of memory. Actually,
my manual states you can add an optional daughter board for
a total of three megs of memory. The four meg daughterboard
is not documented in my manual

__________________________________________________________________________
This article is posted for factual information only. Any misrepresentation,
if any, is purely unintentional. Any opinion expressed or implicit in
these remarks are solely my own.

nghiem@emx.utexas.edu
!cs.utexas.edu!ut-emx!nghiem
nghiem@ccwf.cc.utexas.edu
!cs.utexas.edu!ut-emx!ccwf!nghiem