Path: utzoo!utgpu!news-server.csri.toronto.edu!mailrus!cs.utexas.edu!usc!elroy.jpl.nasa.gov!zardoz.cpd.com!everex!jde
From: jde@everex.UUCP (-Jeff Ellis)
Newsgroups: comp.unix.i386
Subject: Re: Trailblazer using com3
Keywords: Trailblazer ESIX com2 /dev/tty02
Message-ID: <481@everex.UUCP>
Date: 26 Mar 90 17:07:58 GMT
References: <1026@xroads.UUCP>
Reply-To: jde@everex.UUCP (-Jeff Ellis)
Distribution: usa
Organization: ESIX System V, Santa Ana, CA, USA
Lines: 16

In article <1026@xroads.UUCP> chandler@xroads.UUCP (Jim Chandler) writes:
>
>I have a Trailblazer with the Release 3.00 proms.  This is not a TrailBlazer+
>but is does everything that a TB+ does (I think).  I would like to use the
>two built in serial ports on my Dell 310 so I need to configure it as com3
>anyone know how to setup the kernel to recognized the third port?  When I

The ESIX asy driver does not support IRQ sharing between boards, we do support
multiport dumb boards using one IRQ. For what you need I have heard the FAS
driver works in the situation you have. I know of a customer with the interal
TB+ on comm3 with ESIX & FAS.


-- 
Jeff Ellis		ESIX SYSTEM/V  UUCP:uunet!zardoz!everex!jde
			US Mail: 1923 St. Andrew Place, Santa Ana, CA 92705