Xref: utzoo comp.protocols.tcp-ip:10715 comp.unix.xenix:10789
Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!usc!zaphod.mps.ohio-state.edu!van-bc!jtc
From: jtc@van-bc.UUCP (J.T. Conklin)
Newsgroups: comp.protocols.tcp-ip,comp.unix.xenix
Subject: Re: Using SLIP with SCO Xenix/Unix
Keywords: SLIP unix multiport serial RS-232
Message-ID: <285@van-bc.UUCP>
Date: 27 Mar 90 19:16:03 GMT
References: <685@polygen.UUCP> <260F7FA9.4661@tct.uucp>
Reply-To: jtc@van-bc.UUCP (J.T. Conklin)
Organization: Wimsey Associates
Lines: 13

In article <260F7FA9.4661@tct.uucp> chip@tct.uucp (Chip Salzenberg) writes:
>SCO TCP/IP for Xenix supports SLIP.  It works; I've used it.  However,
>be warned: SCO SLIP works *only* with SCO serial drivers, so it will
>*not* work with intelligent boards that come with their own drivers.

Not true.  We use a Bell Tech HUB-6 card w/16550's and a driver developed
by Stuart Lynne for our SLIP link.  The driver was written before we had
SLIP, so I'm pretty sure nothing special had to be done to get it to work.

	--jtc
-- 
J.T. Conklin
	...!{uunet,ubc-cs}!van-bc!jtc, jtc@wimsey.bc.ca