Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!samsung!uunet!dayvb!afitamy!f210.n110.z1.FIDONET.ORG!Bob.Collinsworth
From: Bob.Collinsworth@f210.n110.z1.FIDONET.ORG (Bob Collinsworth)
Newsgroups: comp.sys.amiga
Subject: Re: Microbotics hardframe and
Message-ID: <202.26202D0C@afitamy.fidonet.org>
Date: 8 Apr 90 13:13:52 GMT
Sender: ufgate@afitamy.fidonet.org (newsout1.26)
Organization: FidoNet node 1:110/210 - Starchaser BBS, Dayton OH
Lines: 17

Maybe in YOUR system this is the case, but I have my MaxTransfer set to
1048576 (1 Meg) and have NEVER had a problem. I have had the HardFrame
running for well over a year now and I have 2 drives connected to it!
They are both CDC Wren III drives (16 ms with 32K data buffers), If you
are using slow or cheaper drives, then this might be a problem. Using a
fast, high quality and high capacity drive, there is NO problem that I
have seen (with the exception of not CURRENTLY supporting SCSI Tape)!

                  Bob Collinsworth


--  
----------------------------------------------------------------------------
AFIT Amiga Users BBS/UFGateway |Bob Collinsworth - via FidoNet node 1:110/300
    1:110/300 Dayton, Ohio     |UUCP: afitamy!210!Bob.Collinsworth
        (513)-252-7681         |ARPA: Bob.Collinsworth@f210.n110.z1.FIDONET.ORG
----------------------------------------------------------------------------