Path: utzoo!utgpu!news-server.csri.toronto.edu!clyde.concordia.ca!uunet!cs.utexas.edu!romp!auschs!awdprime!sabre.austin.ibm.com!robin From: robin@sabre.austin.ibm.com (Robin D. Wilson/1000000) Newsgroups: comp.sys.amiga.hardware Subject: Re: Monitor problems Message-ID: <2071@awdprime.UUCP> Date: 9 Apr 90 21:41:49 GMT References: <1368@lpami.wimsey.bc.ca> Sender: news@awdprime.UUCP Reply-To: robin@reed.UUCP (Robin D. Wilson/1000000) Organization: IBM AWD, Austin, TX Lines: 26 In article <1368@lpami.wimsey.bc.ca> lphillips@lpami.wimsey.bc.ca (Larry Phillips) writes: >In <1990Apr8.174215.6461@cunixf.cc.columbia.edu>, es1@cunixb.cc.columbia.edu (Ethan Solomita) writes: >>just like to know what I can do about it. The problem is that I will >>see this little line that stretches horizontally across the screen >>move up from the bottom to the top of the screen. So far, it is only > >The most comnon cause of that problem is the presence, nearby, of another >monitor or TV set. On any two monitors, unless they are being driven by the >same video source, you can have a small variation in scan frequencies. This >will cause the symptoms you describe, with the speed of the moving line being a >function of the frequency difference. Best solution is to physically separate >the monitors. I have this problem, but it is not caused by another monitor. The only other monitor I have is my T.V. and it is in another room -- at least 30 feet away. +-----------------------------------------------------------------------------+ |The views expressed herein, are the sole responsibility of the typist at hand| +-----------------------------------------------------------------------------+ |USNail: UUCP: | |2323 Wells Branch Pkwy., #G107 cs.utexas.edu!romp!ibmchs!auschs\ | |Austin, TX 78728 !sabre.austin.ibm.com!robin | |Home: (512)251-6889 ^^^^^^^^^^^^^^<-MUST BE INCLUDED| +-----------------------------------------------------------------------------+