Path: utzoo!utgpu!news-server.csri.toronto.edu!mailrus!uwm.edu!rpi!zaphod.mps.ohio-state.edu!usc!snorkelwacker!bloom-beacon!eru!luth!sunic!mcsun!unido!mpirbn!p554mve
From: p554mve@mpirbn.UUCP (Michael van Elst)
Newsgroups: comp.sys.amiga.tech
Subject: Re: 2090A scsi direct
Message-ID: <714@mpirbn.UUCP>
Date: 8 Apr 90 12:08:27 GMT
References: <1351@lpami.wimsey.bc.ca> <28681@cup.portal.com>
Reply-To: p554mve@mpirbn.UUCP (Michael van Elst)
Organization: Max-Planck-Institut fuer Radioastronomie, Bonn
Lines: 15

In article <28681@cup.portal.com> phorgan@cup.portal.com (Patrick John Horgan) writes:
>Just wanted to add a note to anyone doing scsi direct for tapes.
>The 2090A doesn't seem to support multi-block read/writes.  If you
>always do a 1 block read/write it's ok, otherwise you get phase-errors.
>
>Have fun:)

Doesn't it ?

There had been several driver versions, it shouldn't be hard for C=
to fix that since that's a software problem.

-- 
Michael van Elst
p554mve@mpirbn.mpifr-bonn.mpg.de