Xref: utzoo comp.sys.amiga.tech:11082 comp.sys.amiga.hardware:1068
Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!swrinde!zaphod.mps.ohio-state.edu!wuarchive!psuvax1!psuvm!blekul11!GUTEST9
From: GUTEST9@BLEKUL11.BITNET (Ives Aerts)
Newsgroups: comp.sys.amiga.tech,comp.sys.amiga.hardware
Subject: Need some diagnose on my dead 8^( amiga.
Message-ID: <9Apr1990212544137@BLEKUL11.BITNET>
Date: 9 Apr 90 21:20:51 GMT
Reply-To: GUTEST9@BLEKUL11.BITNET
Organization: K.U.Leuven, Leuven (Belgium)
Lines: 15
Disclaimer: Author bears full responsibility for contents of this article


Help....

I just finished converting my amiga 500 in a PC case (extended keyboard,...)
but I must have done something wrong 8^( Until now everything worked ok but
when I tried to start up my amiga it failed. It passes the self test
perfectly, the screen becomes white but it doesn't put up the workbench hand.
I immediatly suspected the 8520 (the drive didn't test for a disk). A
friend told me to change the two 8520's in my amiga but it still wouldn't
boot.
Are there any hardware wiz's out there who could give me some hints on
what may be wrong ? Thanx in advance..

                                                      Ives Aerts
                                               GUTEST9 at BLEKUL11.BITNET