Path: utzoo!utgpu!watserv1!watmath!att!tut.cis.ohio-state.edu!snorkelwacker!apple!north From: north@Apple.COM (Donald N. North) Newsgroups: comp.sys.apollo Subject: Re: jove on apollo? Message-ID: <40236@apple.Apple.COM> Date: 13 Apr 90 05:06:59 GMT References: <1990Apr11.100739.23893@axion.bt.co.uk> Organization: Apple Computer, Inc. Lines: 21 In article michel@ele.tue.nl (& Berkelaar) writes: >In article <1990Apr11.100739.23893@axion.bt.co.uk> crouch@axion.bt.co.uk (Chris Rouch) writes: > Has anyone got jove working on an apollo running 10.2? I can get it to > build, but not run properly if i use ver bsd4.3, ...... >Jove will not run on Apollo's properly because it does not understand >pathnames starting with //. I did have a look at the code, but it is full of >hardcoded '/' and "/", so I did not even try to touch it. I would be >interested in hearing of solutions too. Huh? I've had jove 4.13 running on an Apollo 4500 (albeit running 10.1) for several months now with no problems - that port went flawlessly. I think you may want to try a newer version (older versions have been notorious for being very machine dependent and hard to port). -- Don North ----- Apple Computer, Inc. ----- Advanced Technology Group UUCP: ...!{voder,nsc,decwrl,sun}!apple!north CSNET: north@Apple.COM {{ Facts are facts, but any opinions expressed are my own, and *do not* }} {{ represent any viewpoint, official or otherwise, of Apple Computer, Inc.}}