Path: utzoo!attcan!uunet!fernwood!apple!usc!zaphod.mps.ohio-state.edu!uwm.edu!lll-winken!ncis.tis.llnl.gov!blackbird!udecc!udcps3!sobol From: sobol@udcps3.cps.udayton.edu (Steven Sobol) Newsgroups: comp.sys.ibm.pc.programmer Subject: Re: Re^2: VT-100 control sequences Summary: This is only some of them, but... Message-ID: <1990Apr7.045921.3637@udcps3.cps.udayton.edu> Date: 7 Apr 90 04:59:21 GMT References: <76?#QL@rpi.edu> <20698@dartvax.Dartmouth.EDU> <305@tenset.UUCP> Reply-To: sobol@udcps3.cps.udayton.edu (Steven Sobol) Organization: The University of Dayton Computer Science Department, Dayton, Ohio Lines: 40 OKAY... I looked for the file I had that listed all the VT-220 (and therefore VT-100) control sequences, but I don't remember where it is... so here are some of the VT-220 codes, including "color" codes. These are the ones that I remember offhand... ESC [#,#,#...#m Change video attributes: # equals... 0 : Normal; cancel any attributes that are set. *1 : Underline. *4 : Bright. *5 : Flashing bright/normal or normal/dark. 7 : Reverse video. * : only appears on a VT-220 or VT-100 with Advanced Video Option. ESC [1m produces either underlining or reverse video based on how setup switch 1-4 (1-4? I think 1-4) is set. Also: PF1 thru PF4 send ESC OP through ESC OS UP and DOWN send ESC [A and ESC [B LEFT/RIGHT send ESC [D and ESC [C Keypad 0-9 send ESC [Op through ESC [Oy Keypad , sends ESC [Ol Keypad ENTER sends ESC [OM Keypad - sends ESC [Om Keypad . sends ESC [On ESC [x;yH moves cursor ESC [J clears screen ([0J beg of scrn > C; [1J C > end of scrn; [2J whole sc) ESC [K clears line ([0K beg of line > C; [1K C > end of line; [2K whole ln) (C is current position) I'm going to continue searching for that file and will post it if I find it... -- STEVE SOBOL | UUCP:!UUNET!DAYVB!{UDCPS3|AFITAMY}!SOBOL | 318 Founders Hall, Dayton OH 45469 procedure Standard-Flame: writeln ("People like you make me wanna PUKE!"); "But Soft- What Yonder Light I See? Tis the Computer Lab. Juliet's at the Sun"