Path: utzoo!attcan!uunet!samsung!zaphod.mps.ohio-state.edu!sdd.hp.com!elroy.jpl.nasa.gov!ames!dftsrv!drax!buck
From: buck@drax.gsfc.nasa.gov (Loren (Buck) Buchanan)
Newsgroups: comp.sys.sgi
Subject: Re: Saving files under Sun PC-NFS
Message-ID: <1622@dftsrv.gsfc.nasa.gov>
Date: 12 Apr 90 13:59:35 GMT
References: <90101.091541RIE@psuvm.psu.edu>
Sender: news@dftsrv.gsfc.nasa.gov
Reply-To: buck@drax.gsfc.nasa.gov (Loren (Buck) Buchanan)
Organization: Computer Sciences Corporation @ NASA Goddard Space Flight Center
Lines: 21

In article <90101.091541RIE@psuvm.psu.edu> RIE@psuvm.psu.edu writes:
>After editing a file in my PC/AT whenever I want to save the file
>directly on our Personal Iris using Sun PC-NFS i get the message
>'Disk Full' and the file is not saved. However if i want to copy
>a file from the PC hard disk (as diffent from direct memory)
>to the PI using PC-NFS there is no problem.

I had this problem with some custom software I was developing.  I 
ended up changing the open/writes to fopen/fwrites and things worked.

I was using Microsoft C 5.1.  The thing that really bothers me about
this is that supposedly in C, fopen should use open and fwrite
should use write.  Any comments about Microsoft C should be sent to
the appropriate news group (one of those I don't normally read).

B Cing U

Buck
Loren "Buck" Buchanan | internet: buck@drax.gsfc.nasa.gov | standard disclaimer
CSC, 1100 West St.    | uucp: ...!ames!dftsrv!drax!buck   | "By the horns of a
Laurel, MD 20707      | phonenet: (301) 497-2531 or 9898  | sky demon..."