Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!rice!sun-spots-request
From: rmk@snowhit.att.com
Newsgroups: comp.sys.sun
Subject: Re: Archive viper 150 on Suns
Keywords: Hardware
Message-ID: <6511@brazos.Rice.edu>
Date: 6 Apr 90 11:24:58 GMT
Sender: root@rice.edu
Organization: Sun-Spots
Lines: 24
Approved: Sun-Spots@rice.edu
X-Refs:  Original: v9n108
X-Sun-Spots-Digest: Volume 9, Issue 115, message 11

In-Reply-To: your article <6350@brazos.Rice.edu>

> I'm planning to plug our own Archive Viper 150's into a couple of Suns
> (SS1's actually), and I'm wondering about jumper settings.

I recently pulled the 150 Mbyte tape drive from my 4/370 (Archive Model
2150S), put it on a 4/60, and only had to address the ID0-ID2 pins to
agree with 4/60 SCSI IDs.

My pins look like this; oo [oo][oo]
                        oo [oo] oo
                        oo [oo][oo]

                        PEN CF0 ID0    (printing on bottom of pc board)
                        DIA CF1 ID1   
                            CF2 ID2

CF0-CF2 are covered and the ID0-ID2 read 101 which is SCSI ID for
/dev/st1.

Good luck,
Richard Kurtz
AT&T
rmk@snowhit.att.com