Path: utzoo!utgpu!news-server.csri.toronto.edu!mailrus!cs.utexas.edu!samsung!dali!milton!oregon!michelbi
From: MICHELBI@oregon.uoregon.edu (Michel Biedermann)
Newsgroups: comp.sys.zenith
Subject: Re: <CTL>-<ALT>-I and N on a Z-549 (VGA card)
Message-ID: <18746@oregon.uoregon.edu>
Date: 8 Apr 90 16:49:56 GMT
References: <18382@oregon.uoregon.edu> <75190@kean.ucs.mun.ca> <4041@plains.UUCP>
Distribution: usa
Organization: University of Oregon
Lines: 23

In article <4041@plains.UUCP>, bezenek@plains.UUCP (Todd M. Bezenek KO0N) writes:
>>Funny, when I do *either* a <CTL>-<ALT>-I or a <CTL>-<ALT>-N, I get
>>the video mode change to 47 lines (or thereabout).  I can't get back
>>to 25-line mode using the keyboard.  What's going on here?

> I have had the same experience and have the same question.  Also, I would
> like to know how to change the *font* to one that works with the 47 lines.
> When I change to this size, the letters are too high to fit in the smaller
> lines.

I have a feeling the two problems are related.  On my home computer, switching
to 47 lines per screen mode also switches to a very readable, smaller font.
This video mode comes in very handy in my C editor.  The solution I would offer
is the same as I have offered before.  Try upgrading your ROMs.  Should you
have any questions concerning this, feel free to contact me.  But a good place
to start would be your local retailer, or ZDS student representative if you are
on a campus.

I hope this helps...

Michel Biedermann	michelbi@oregon.uoregon.edu
U. of Oregon
ZENITH Student Rep.