Path: utzoo!utgpu!news-server.csri.toronto.edu!rutgers!usc!zaphod.mps.ohio-state.edu!uwm.edu!ogicse!cs.uoregon.edu!oregon!michelbi
From: MICHELBI@oregon.uoregon.edu (Michel Biedermann)
Newsgroups: comp.sys.zenith
Subject: Re: question about 3.5 and 5.25 disk drives
Message-ID: <19049@oregon.uoregon.edu>
Date: 13 Apr 90 22:52:25 GMT
References: <2625F3DA.74F5@deimos.cis.ksu.edu>
Distribution: usa
Organization: University of Oregon
Lines: 16

In article <2625F3DA.74F5@deimos.cis.ksu.edu>, fong@ksuvax1.cis.ksu.edu (Eric Fong) writes:
> I have a 248/12 model with a 3.5 disk drive as the A drive and 5.25 as
> the B drive, is there a simple to switch the disk assignment (i.e. change
> the 5.25 drive to A drive)?  Since I have to load MINIX OS on it, and

While you can't truly switch disk drive assignments, probably the easiest
solution to your problem is to use ASSIGN X Y, where X while be assigned or 
addressed as drive Y.  In your case, you will want to ASSIGN B A.  From now
on (until you correct this) every time you will try to access drive A, the
light on your drive B will come on.

I hope this helps...

Michel Biedermann	michelbi@oregon.uoregon.edu
U. of Oregon
Zenith Student Rep.