Path: utzoo!utgpu!news-server.csri.toronto.edu!mailrus!cs.utexas.edu!uunet!willett!ForthNet
From: ForthNet@willett.UUCP (ForthNet articles from GEnie)
Newsgroups: comp.lang.forth
Subject: FPC forth?????????
Message-ID: <901.UUL1.3#5129@willett.UUCP>
Date: 6 May 90 03:55:14 GMT
Organization: Latest link in the ForthNet chain.  (Pgh, PA)
Lines: 25


 Date: 05-04-90 (23:17)              Number: 1798 (Echo)
   To: CRAIG DEADY                   Refer#: 1797
 From: JERRY SHIFRIN                   Read: NO
 Subj: F-PC Cross Compiler           Status: PUBLIC MESSAGE

 CD>Does anyone know of a cross compiler for the Zilog Z-80 microprocesso
 CD>that runs under F-PC? It can be just an assembler or better yet cross
 CD>compile F-PC code to the Z-80.

 You may want to take a look at F68HC11A.ZIP.  It's a
 cross-assembler for the 68HC11 you may find useful as an example.
 It's written in Forth-83 and should be mostly portable to F-PC.
 ---
  ~ EZ 1.26 ~ 

[You can get this directly from ECFB (see the OLIS FORTHNET file for
more info on ECFB and ForthNet in general).  I can try to get it from
GEnie (there has been a recent flood of new files so I don't know if it
is there or not) and then try to send it on to SIMTEL20 for those with
Anonymous FTP access.  Send inquires along these lines to one the addresses
below.  -Doug]
-----
This message came from GEnie via willett through a semi-automated process.
Report problems to: 'uunet!willett!dwp' or 'willett!dwp@gateway.sei.cmu.edu'