Path: utzoo!utgpu!news-server.csri.toronto.edu!rutgers!cs.utexas.edu!uunet!willett!ForthNet
From: ForthNet@willett.UUCP (ForthNet articles from GEnie)
Newsgroups: comp.lang.forth
Subject: Forth Engines / Harris
Message-ID: <904.UUL1.3#5129@willett.UUCP>
Date: 6 May 90 03:55:24 GMT
Organization: Latest link in the ForthNet chain.  (Pgh, PA)
Lines: 18


 Date: 05-04-90 (17:28)              Number: 488 (Echo)
   To: JACK WOEHR                    Refer#: 477
 From: ANIL RODRIX                     Read: NO
 Subj: RTX2001                       Status: PUBLIC MESSAGE

 I just talked to Harris (Chris Ellis?) but was fumbling for what to ask.
 She said the larger portions of the machine should be described, and it
 would be nice if it could be demonstrated if there was an interest, but
 not as part of the entry being sent in. Also the EB could be worked on
 later than the June 8 deadline as the written part should be in by then.
 In my case I would need encoders, D/A converters, my servo-type drives
 and maybe motors to be able to demonstrate anything. I still cannot
 quite see - with just asingle board what does a spectator look at - the
 code? 
-----
This message came from GEnie via willett through a semi-automated process.
Report problems to: 'uunet!willett!dwp' or 'willett!dwp@gateway.sei.cmu.edu'