Path: utzoo!utgpu!news-server.csri.toronto.edu!rutgers!cs.utexas.edu!uunet!van-bc!rsoft!mindlink!a808
From: a808@mindlink.UUCP (David R. Matthews)
Newsgroups: comp.sys.amiga.hardware
Subject: Re: H E L P ! !...MIDI cable needed...
Message-ID: <1649@mindlink.UUCP>
Date: 3 May 90 01:56:46 GMT
Organization: MIND LINK! - British Columbia, Canada
Lines: 8

WHATCHA NEED IS A MIDI INTERFACE, I USE AN "ECE" MIDI INTERFACE. THERE ARE MANY
BRANDS. THE INTERFACE PLUGS IN TO THE SERIAL PORT, AND THEN YOU PLUG THE CASIO
INTO THE INTERFACE. TO PLUG THE CASIO INTO THE INTERFACE YOU NEED 5-PIN "DIN"
CABLES. GET TWO OF THEM, SAT 10 FEET LONG. PLUG THE "OUT" OF THE INTERFACE TO
THE "IN" OF THE CASIO, AND PLUG THE "OUT" OF THE CASIO TO THE "IN" OF THE
INTERFACE. THIS IS A VERY BASIC SETUP AND IS A GOOD WAY TO GET STARTED WITH
DMCS.
GOOD LUCK.