Path: utzoo!utgpu!news-server.csri.toronto.edu!rutgers!cs.utexas.edu!swrinde!zaphod.mps.ohio-state.edu!sol.ctr.columbia.edu!ucselx.sdsu.edu!sdsu!crash!pro-graphics.cts.com!danb20
From: danb20@pro-graphics.cts.com (Dan Bachmann)
Newsgroups: comp.sys.amiga.hardware
Subject: Re: Pin-out for external drive needed !!!
Message-ID: <2539@crash.cts.com>
Date: 6 May 90 05:56:33 GMT
Sender: root@crash.cts.com
Lines: 15

In-Reply-To: message from c60a-2fe@web-2f.berkeley.edu

Well, I believe hooking an external drive up is much more than pin matching.
The drive will work fine but you'll have to hook it to the floppy board (like
the one inside an Amiga 1010 disk drive) or you can simply replace your
existing one with it.  My Amiga came with Chinon 3.5" drives and I replaced
them with quiter Panasonic 3.5" drives (actually a friend did it, then I later
repeated the process for a second drive)... If any one knows where they can
get that little board that goes between the drive and DB23, I'd be interested
in knowing if it's reasonably priced.  I don't even know where to get DB23s!
 ProLine: danb20@pro-graphics
    UUCP: ...crash!pro-graphics!danb20
ARPA/DDN: pro-graphics!danb20@nosc.mil
Internet: danb20@pro-graphics.cts.com
u.s.mail: 509 StonyBrook Drive, Bridgewater, NJ, 08807 USA