Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!uwm.edu!psuvax1!rutgers!faatcrl!jprad
From: jprad@faatcrl.UUCP (Jack Radigan)
Newsgroups: comp.sys.amiga.tech
Subject: Re: JRComm (Was Re: AMIGA too slow for speeds higher than 9600 Baud? HELP!)
Message-ID: <1361@faatcrl.UUCP>
Date: 4 May 90 23:49:27 GMT
References: <02373.AA02373@spirit.kref.sub.org> <625@titan.tsd.arlut.utexas.edu> <22897@uflorida.cis.ufl.EDU> <1332@faatcrl.UUCP> <334@ncc1701.sub.org> <1352@faatcrl.UUCP> <339@ncc1701.sub.org>
Organization: FAA Technical Center, Atlantic City NJ
Lines: 15

space@ncc1701.sub.org (Lars Soltau) writes:

>Well, I took the vt100 definition file of a PC running ix/386 (I think it was
>/usr/lib/termlib/v/vt100 or so) and searched for $50 (80). This byte I changed
>into $54 (84). Then I looked for $19 (25) and changed it to 33 or so. Voila,
>I had a Unix system with 33*84 characters. MicroEmacs 3.10, vi, elm, more,
>nethack all used the additional rows and columns.

  I've already been reminded (painfully :-)) about using the termcap entry to
  modify it.  Anyways, as mentioned before, JR-Comm now uses the Workbench
  size for all its screens.
					^^^
					 |-- (It's not as late this time John... <grin>)

  -jack-