Path: utzoo!utgpu!news-server.csri.toronto.edu!mailrus!cs.utexas.edu!uunet!van-bc!ubc-cs!nebulus!dennis From: dennis@nebulus.UUCP (Dennis S. Breckenridge) Newsgroups: comp.sys.att,u3b.tech Subject: Re: 3b2 disk limit Keywords: 3b2 hard disk idtools Message-ID: <1990May8.151908.884@nebulus.UUCP> Date: 8 May 90 15:19:08 GMT References: <1990May2.142538.4822@nebulus.UUCP> <1990May4.005702.1187@robohack.UUCP> <1990May4.154009.10562@nebulus.UUCP> <1990May7.152729.25792@eci386.uucp> Organization: Alchemy Mindworks, Vancouver, Canada Lines: 17 woods@eci386.uucp (Greg A. Woods) writes: >If you are using a Maxtor, or some other large drive with similar >geometry, you can use drive type id 11. Filledt and/or prtconf know >this drive type as a "135 Megabyte Drive". What about adding a MAXTOR entry in the equipped device table. I used to remember the command syntax, but a man page on /etc/edttbl used to show you how. I thought it was something like: /etc/edttbl -l /dgn/edt_data -blah blah. This is where all the prtconf info comes from. DGN should find it as well unless EhTNT buried the drive test configs into the binaries! -- ----------------------------------------------------------------------------- Dennis S. Breckenridge (604) 277-7413 dennis@nebulus.uucp VE7TCP Still brain dead after all these years :-) -----------------------------------------------------------------------------