Path: utzoo!utgpu!news-server.csri.toronto.edu!clyde.concordia.ca!uunet!cs.utexas.edu!uwm.edu!archimedes.math.uwm.edu!jgreco
From: jgreco@archimedes.math.uwm.edu (Joe Greco)
Newsgroups: comp.sys.cbm
Subject: Re: Joystick ports
Message-ID: <3836@uwm.edu>
Date: 7 May 90 18:14:32 GMT
References: <3965MV010320@NDSUVM1>
Sender: news@uwm.edu
Organization: University of Wisconsin, Milwaukee
Lines: 10

In comp.sys.cbm article <3965MV010320@NDSUVM1>, MV010320@NDSUVM1.BITNET wrote:
:I have a Commodore +4 and I would like to adapt my regular joysticks to
:the +4 port the question is which wire goes where?????? Here is a sketchy
:display of what the ports look like....

I did this ages ago, but don't have specifics.  Use a meter to locate ground
and +5V on the Plus/4's plug (it may not even have +5V).  Then just play
with ground and the other wires.  :-)

... Joe